Re: Ide?
is the connector for the drive case smaller than that on the drive itself, or the other way around?
They should both be long blocks with lots of pins/holes
Looking at the image it looks like you have a 3.5" sized ide interface on the drive itself which is a bit unusual.
This being the case you will either need a 3.5"->2.5" IDE adaptor, or a 3.5" drive caddy, or you could just simply plug that drive into your PC with a regular ide cable without any need for a drive caddy in the first place
Last edited by Phil^; 24 Oct 2008 at 09:52.
|