Quote:
Originally Posted by Androme2
|
sorry, which is what, you've got 4 devices on two controllers.
from what I can see
Primary
master - HDD @ ATA133 (UDMA6)
slave - optical drive @ ATA33 (MWDMA2)
Secondary
master - HDD @ ATA33 (UDMA2)
secondary - HDD @ ATA33 (UDMA2)
if you're transfering data between the two drives on the secondary channel its going to be a tad slow because 1. the two drives are on the same cable and 2. ATA33 mode
try increasing the UDMA mode to 5, could be the cable is old, i hear some old ones only allow 1 device @ ATA100/UDMA5, if you add another they both default to udma2 :|