N00b RAM Question
I want to add more RAM to my desktop. I don't know how to work out what RAM it has, or what RAM it can physically fit.
I am using Windows Vista. How do I tell? |
Re: N00b RAM Question
Hi,
I used http://www.crucial.com 's "Scan my system" option. It downloads a small piece of software and has hit 9 times out of 10 for me. The other times i manually put in the manufacturer etc and it told me. |
Re: N00b RAM Question
To make 100% sure open you case and search for a name on the mainboard. Make sure you also search for the correct revision. (It often happens that from rev. 1.0 to a later version the ram type changes )
In the manual of the mainboard you can find that info. I have also tried that tool r2baz provided and it worked for me! nice tool btw :) But to make 100% sure i would search for some documentation material of your mainboard. |
Re: N00b RAM Question
Thanks. Where is the best place to buy some extra RAM? Good website?
Edit: I have a 32 bit OS (Vista Home Premium). Should I bother upgrading by 2 gig in the hope of getting 1.5 gig extra memory or should I just go with an extra 1 gig of memory? Using the program listed above, it has recommended that I remove the 1 gig chip already in my PC and replace it with a 2GB chip only. Does this make sense? Edit edit: No Dual Channel Support. |
Re: N00b RAM Question
In theory, it is always best to buy memory in doubles, because they benefit from a higher bandwidth (wiki dual-channel architecture). In practice however, the difference is negligible.
I would add 1 or 2 additional modules of 1 GB, of the same type as you already have (DDR-xxx or DDR2-xxx, where xxx is a number between about 400 and 1066). Windows should be able to utilise about 3 to 3.5 GB of memory, so it might be worthwhile to get 2 modules. As a final note, get the cheapest RAM you can find. Here too, expensive RAM is only marginally (0-2%) faster than cheap RAM. |
Re: N00b RAM Question
I am not sure about Vista, but Windows XP 32bit and Windows Server 2k3 can only adress 3gig? total memory.
Perhaps its worth reading this before: http://www.vistaclues.com/reader-que...windows-vista/ |
Re: N00b RAM Question
its 4 gig, but included in that is graphics card memory and so on, every bit of additional memory that needs addressing - so say you had a 256mb graphics card, you would get 3.75gb of ram available
I think there was something to extend that a bit further for 32bit server os's though, cant remember what though. 32 bit vista should also have the same limitation as the limitation is a hardware one - not a software one |
Re: N00b RAM Question
PAE - Physical Address Extension. It's not really worth the trouble, considering the availability of 64bit drivers.
I also think Windows allocates another half a GB of the address space for other purposes. I've always heard that 3.5 GB is the maximum Windows can use, including video memory. |
Re: N00b RAM Question
Quote:
|
Re: N00b RAM Question
Yes. Make sure your motherboard is ok with modules of 2 GB though.
|
Re: N00b RAM Question
Quote:
|
Re: N00b RAM Question
No, I don't think it'll make a difference. Go into a store and ask.
|
Re: N00b RAM Question
PC2-5300 is a pretty common module so just see if a friend has some which you can test on your machine although it should be fine to use anyway.
My most recent purchase was made from http://www.mrmemory.co.uk/ was cheap and arrived next day. Although i hear crucial are also a good supplier so i would just go with the cheapest. |
Re: N00b RAM Question
I have bought RAM from Amazon before and it was cheap and works fine.
Not sure of the differences between 5200 and 5300 or whether they can be mixed but found a few results for 5200. http://www.google.co.uk/products?q=D...&hl=en&show=dd hth |
Re: N00b RAM Question
http://www.memory-express.co.uk/
used in the past for cheapish also http://www.kingston.com/ has a ram checker on their site in case you went with kingston |
Re: N00b RAM Question
*BUMP*
After running the RAM scanner from www.crucial.com, it said I had two memory slots and that I should replace my 1GB chip with a 2GB chip, leaving the second memoy slot empty. It also says that the maximum amount of RAM my PC can support is 2GB. How is this worked out, why does it not support 3GB? Would a 2GB chip be noticably faster than having 2 1GB chips? |
Re: N00b RAM Question
It would probably be a bit faster but nothing noticeable, as for the maximum supported ram this is decided by what your motherboard can handle putting any more than this in would most likely not work or do some damage to your system. Although you could try a bios update and see if that makes a difference to the maximum supported.
Whats the price difference between the two memory modules? if it isn't a great deal i would opt for the 2gb incase at some point you wish to upgrade again. |
Re: N00b RAM Question
Quote:
|
Re: N00b RAM Question
Your Packard Bell iStart C2389 Specifications
# Maximum Memory Capacity: 2048MB # Currently Installed Memory: 1GB # Available Memory Slots: 1 # Total Memory Slots: 2 # Dual Channel Support: No # CPU Manufacturer: GenuineIntel # CPU Family: Intel(R) Pentium(R) 4 CPU 3.20GHz Model 6, Stepping 5 # CPU Speed: 3192 MHz Each memory slot can hold DDR2 PC2-5300 with a maximum of 2GB per slot.* *Not to exceed manufacturer supported memory. |
All times are GMT +1. The time now is 04:18. |
Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2002 - 2018